This blog focuses specifically on general TrueRife Frequency updates for TrueRife owners. Updates such as these are regularly provided by TrueRife’s manufacturer to keep programs current and generators functioning optimally.

As a rule-of-thumb, TrueRife recommends running frequency updates monthly, as program updates are constantly in-process. This isn’t mandatory, by any means, but it’s highly encouraged.

Step 1: Switch “Airplane Mode” to OFF

All of our patients’ computers are placed in airplane mode upon initial setup and programming.

The Wifi and Airplane Mode icon is on the bottom right of your computer screen. FIRST, select the small airplane located directly in the menu bar, and THEN deselect the large Airplane Mode icon {as shown in the image below}.

IMG 4535

From there you will see a list of wifi options become available for you to connect to.

Step 2: Connect Laptop to Wifi

Once you connect to wifi for the first time, you shouldn’t have to repeat this step.

If you are asked whether to have your laptop remember your password {especially if it’s a home or secure office connection}, select “yes”. This way, you won’t have to worry about actively connecting to wifi again.

Step 3: Open Your TrueRife Application

This is the exact same application you have been using to run your Rife programs. You do not need to open anything special in order to update frequencies.

Step 4: Select “Update Frequencies” from the TrueRife Menu Bar

This icon is located in the upper righthand portion of the application.

Screen Shot 2021 11 03 at 2.06.32 PM

Once you select “Update Frequencies”, look to the bottom of the application to the royal blue status bar which spans the bottom of the TrueRife window. You will see a message which reads “Downloading frequencies from the TrueRife website. This can take a few minutes. Please wait until download is completed…” 

Screen Shot 2021 11 03 at 2.22.11 PM

When the application is finished downloading updated frequencies from TrueRife, another message will appear within the royal blue band which reads, “Done updating frequencies!”.

Screen Shot 2021 11 03 at 2.26.37 PM

This is how you’ll know your Rife programs are fully updated and you are ready to use your Rife machine again!

Step 5: Return Laptop to Airplane Mode and Resume Rife Usage

To prevent unnecessary malware/data storage pop-ups from constantly interrupting your laptop use, keeping Airplane Mode engaged is the best way to go.

YOU’RE ALL SET!!

**If you are a patient of Conners Clinic and are looking to update your custom frequencies, please reach out to your assigned liaison or call our clinic directly to start the process of updating your program.

Below is a YouTube video presentation which highlights these very steps listed above.

Patient Question: How Do I Update General Rife Programs?